你好，在这个视频中将学习 Taimur 的用法。
Hello in this video will learn Taimur usage.

好吧，让我们从我们的父亲开始吧。
OK, let's start with our fathers.

好吧，这就是我们的本性。
OK, this is our nature.

这是我们的第一个。
This is our first one.

好的。
OK.

现在我们需要的是让我们继续承包商，好吧，这是承包商被叫到这里的。
And now what we need let's continue with the contractor, OK, this is contractor called to here.

让我们将迫击炮感应电机插入这里，现在插入我的承包商。
Let's insert mortar induction motor to here and now that is insert my contractor.

联系到这里，我们在这里插入三个快速电源。
Contact to here, let's insert three fast power supply here.

好的，首先我将连接所有这些电机。
OK, first thing that I will connect them all these motor.

我们将启动这个电机，例如，10秒，然后这个电机将完成，将停止，好吧，也许像这样。
And we will start this motor, for example, 10 seconds, and then this motor will be finished, will be stopped, OK, like this maybe.

好的，棒极了。
OK, very good.

现在我们需要首先定义这个接触器。
Now what we need let's first define this contactors.

好的，一个。
OK, one.

这将会是。
And this will be.

好的，一，让我们将开始按钮插入到这里，这将是我们的开始按钮，从这里听到并知道我们需要什么，我们需要让它开始。
OK, one, and also let us insert our start button to here, this will be our start button and to hear and from here and then to hear and know what we need, we need to let this started.

所以我需要一个常开触点。
So I need one normally open contact.

好的，这将是这里到这里和这里。
OK, and this will be here to here and here.

这也可以。
This will be also OK one.

现在我们可以进入延迟时间了。
And now we can go to on delay time.

真的。
Really.

好的，这是我们的时间，从这里我们可以，然后我们可以听到，好的。
OK, this is our time and from here we can and then we can get to hear, OK.

然后我们需要的是，我们需要一直在这里添加我们的联系人。
And then what we need, we need to add to here all this time our contacts.

所以我也会删除这个。
So I will delete this too.

我这里加一下平时密切接触者，好，就这样。
And I will add here normally close contact, OK, like this.

再次，让我们将它们全部连接起来。
And again, let's connect them all.

像这样，这将在政策程序中想象为零，这将是计时器零，这将是五秒。
And like this and this will be imagined in the policy program times zero and this will be timer zero and this time will be five seconds.

好的，现在我们可以开始了。
OK, and now we can start it start.

所以我会按下开始按钮，但突然它就起作用了。
So I will press my start button, but suddenly it worked.

好的，所以我们需要说的是，我们需要说在这个接触器明确转动之后启动这个定时器。
OK, so what we need to say, we need to say start this timer after this contactor clearly turning.

好的，我们继续看最新的。
OK, so let's continue with the latest one.

现在我们需要类似的东西，常开触点再次听到。
And now we need to similar thing, normally open contact once more to hear.

这里好，那么这个也可以。
And here, OK, then this will be also OK.

现在让我们开始吧。
So now let's start.

所以一切都在等待。
So everything is waiting.

如果我按下那个按钮，你就可以看到驾车者不断地转弯，五秒钟后它就停止了，我的电路被破坏并再次激活。
If I press that button so you can see motorists turning and turning and five seconds later it's stopped and my circuit is broken and activated again once more.

现在，五秒钟后，该电机将停止。
So now, five seconds later, this motor is going to stop.

那么，如果我把它改成，比如说这次，或者第二卷，比如说，会发生什么？
So again, if I change it to, for example, this time or volume two, for example, what will happen?

这次你会数那一刻。
And that moment this time will you will count.

九、八、七，十秒后，好的，根据我们的方案，该电机将立即停止。
And nine and eight and seven and after ten seconds, OK, this motor will stop immediately according to our scheme.

这就是我们如何在电路控制电路中使用延迟定时器。
So this is how can we use, uh, on delay timer in our circuit control circuits.

而这只是一个逻辑。
And this is just a logic.

然后我们将在策略中做同样的事情，我们将在策略中做这些事情来控制我们的电机。
Then we will do the same thing in the policy and we will do these things in the policy to control our motors.

我完成了这个视频。
I finished for this video.

下一个视频见。
See you in the next video.